Thursday, May 14, 2009

40 Years of BMW mid-sized coupes



A tribute to BMW’s mid-sized coupes from the 1996 1
602 to the all new 5th generation 2006 E90 335i Coupe


1602-2002: Beginning of a new automotive era, The 02 1966-1976


On 7 March 1966 the BMW AG celebrated its 50th anniversary. On this particular day, Gerhard Wilcke, the then Chairman of the Board, presented to the guests invited to the Bayerische Staatsoper a new model, the BMW 1600-2.

Being smaller and more stylish than the then-current New Class saloon models, this new model served as a basis for the model range from then on. The 4 centimetre lower roof, the somewhat flatter windscreen, the round headlights and the circular taillights accentuated the car’s dynamics and sportiness. But presumably only a few of the guests noticed these design cues at first glance, as this new saloon had a much more striking feature: It had only two doors, a feature to which the model owes part of its model designation (–2).

Apart from very few details, the interior of this new model was, technologically speaking, on par with the previous four-door BMW 1600, the production of which ceased simultaneously: It was powered by a four-cylinder engine displacing 1,573 cc and producing a maximum output of 85 bhp. As is the case with all BMW models produced at that time, the engine, which was inclined by 30 degrees, was front-mounted. The suspension combining an A-arm front axle and a semi-trailing arm rear axle was also derived from the “New Class”. The braking system was highly advanced and efficient with disc brakes at the front, a feature which had so far been reserved for upmarket automobiles or sports cars. The 1600-2 was not exactly what you would call cheap. At DM 8,650, the entry-level model’s price corresponded to the annual income of an employee. What customers did get for their money was a state-of-the-art car with a total weight of 940 kg, offering a formidable power/weight ratio. The 0-62 mph sprint took about 13 seconds, and with a top speed of 166 km/h (103 mph) it was one of the fastest cars at that time.

The concept was much more promising for the future than initially expected by critics and dreamt of by its supporters. Thus, for example, some Munich dealers, who doubted this concept’s success, kept asking: “Who’s going to buy this car?” Their customers soon taught them otherwise: In the first production year BMW manufactured as many as 13,244 units. In 1967, the four-door car’s production volume of 38,572 units almost exceeded the production figures pertaining to the four-door version with 39,930 units produced.


Whilst young people were revolting all around the globe in 1968, a new “small” BMW caused a sensation among automotive enthusiasts of all ages: The 2002, the ultimate sports saloon for many years to come. The 2002 was available at a price of DM 9,250. Under the bonnet there was a 2-litre engine producing 100 bhp, giving the car a top speed of 170 km/h (106 mph). As many as 339,092 units came off the production line until production was ceased in 1975, thereby raking in the lion’s share of profits made by the 02 Series. However, in 1973 the 2002 turbo with 170 bhp caused an even bigger stir. It was the first German production car to be equipped with a turbocharger.

This top-class model of the 02 Series reached its top speed at 210 km/h (130 mph) while 0-100 km/h came in just 7,3 sec. The 2002 Turbo was available for ten months exclusively in white and silver.


E21: The first 3 Series 1975-1982





Expectations were high when BMW unveiled the first 3 Series in Munich’s Olympia stadium in the summer of1975. BMW opened a new chapter with the launch of the 3 Series. Technologically speaking, the 3 Series was the result of a further development of the 02 Series. Although, from outside, it bore resemblance to the 5 Series, its character was completely unique. A characteristic feature of the new two-door car was its distinct wedge-shape design, which was much disputed by the public at the beginning. The designers also trod new paths as far as the interior was concerned: The cockpit design celebrated its premiere, including the centre console angled towards the driver, a typical feature of the BMW interior for many years to come.

And yet again, gloom was foretold for this BMW model series when it was launched. But again customers reacted positively: In the category of up to 2 litres cubic capacity, the BMW 320 was voted the world’s best saloon by the readers of Europe’s biggest car magazine in 1976. The 3 Series outperformed the 02 Series in every respect: In May 1981, the 1,000,000th 3 Series vehicle came off the production line, making the 3 Series the most successful BMW model series of all times


E30: The 2nd generation – also available with a diesel engine or an all-wheel drive 1982-1991 (Coupe)


In the autumn of 1982, the second generation of the 3 Series replaced the previous models. By the end of the first production year BMW had already sold 233,782 new 3 Series cars. At that time, however, the real attraction had not yet even been released. In the autumn of 1983, the 3 Series featuring four doors hit the showrooms. The small BMW class had already attracted a considerable number of customers who very much approved of the car’s improved fuel economy and increased comfort as a complement to its sporting performance. Thus, in 1985, BMW dared to take the next step with the launch of the 325iX and the 324d. Above all, the six-cylinder diesel engine with a peak power of 86 bhp quickly gained the reputation of being the diesel engine offering the most excellent running smoothness in the entire market.

In 1986, BMW presented the 3 Series Convertible, the first fully open four-seater from Germany for 11 years. With this awesome convertible BMW created once again a trendsetter on four wheels, soon to be followed by the next one: In August 1987, BMW presented to the public a small touring. This utility and sports car has not only been most successful with customers who frequently transport bulky goods, but also with all other groups of buyers simply due to its attractive appearance.





The ultimate "3" was of course the first ever M3. Equiped with a 4cylinder engine, the first generation M3 produced 200 Hp. Latter, BMW debuted two revised versions, the EVO II with 215 Hp and the EVO III with a 2.5 litre engine and 238 Hp - 0-100 km/h in 6,5 sec & top speed of 248 km/h.


E36: The 3rd generation with five body variants 1992-1999




In 1990, the third generation 3 Series, a four-door saloon, was put on the market, gradually followed by the coupĂ©, convertible compact and a touring. When this model series reached its pinnacle at the end of the ’90s, customers could choose from five body variants and ten different engines, the spectrum ranging from a four-cylinder diesel engine delivering 66 kW/90 bhp to a high-tech six-cylinder engine on the revised M3 with a maximum output of 236 kW/321 bhp. The E36 M3 was equiped with a 3.0 286 Hp engine that was latter replaced with a more powerfull 3.2 litre 321 Hp engine -0-100 km/h in 5,5 sec & top speed 250 km/h (electronicaly limited)






E46: The 4th generation 1999-2006
In May 1998, the current BMW 3 Series, which was even more comfortable, safer and more powerful, was launched, first of all in the form of a four-door saloon, with the coupe versions following in 1999.


And it created a great sensation when it was revealed to the public: The 320d made its debut as BMW’s first direct injection diesel engine with a maximum output of 100 kW/136 bhp, a top speed of 207 km/h (129 mph) and a fuel consumption of 5.7 litres. Owing to its running smoothness in particular, it outperformed all its competitors in its class. Toping of the range was once again the all mighty M3 equiped with a 3.2 straight six producing 343 Hp 0-100 km/h 5,2 sec, top speed 250 km/h (electronicaly limited)





E90: SEE THE FIRST OFFICIAL PICTURES & TECHNICAL INFORMATION ON THE 2007, 5th GENERATION BMW 3 SERIES COUPE HERE

2007 Mazda CX-9 Official Information

Mazda released more information and pictures in its new seven-passenger crossover sport-utility vehicle CX-9. Arriving in Mazda dealerships in early 2007, the CX-9 is designed and engineered specifically for North America.

PRESS RELEASE: SPACE TO STRETCH
The Mazda CX-9 rides on one of the longest wheelbases in the segment, providing easy access to its three-row seating. To ease accommodations for all drivers, the driver’s seat and steering column move quickly and easily over a long range of adjustment.

The 60-40 split second row not only carries three in comfort, it also offers approximately five-inches of fore-and-aft slide travel and a reclining backrest. In the 50-50-split third row, the seating position and leg room are both class-leading in numbers and real comfort. Entry to the third row is easy, with nearly 26 inches of access space between the folded second-row seat and the C-pillar. Even with the third row occupied, the CX-9 provides 17.2 cubic feet of cargo capacity, eclipsing many large sedan trunks. Both second- and third-row seats fold flat to allow additional storage all the way up to the back of the front seats.


Extra thought is invested in small details, such as how the CX-9’s seat releases are configured. For example, releasing the second row seat in order to enter the third row requires only one simple hand motion to unlatch the seat and move it forward. Likewise, a clever strap attached behind the third row seat’s backrest serves as both a release for folding the seat and a means of pulling it back erect again.

EXTERIOR STYLING A PRIORITY
Many mid-sized crossover SUVs strive for the utilitarian look. CX-9’s front end is unmistakably Mazda, with its elegantly sculpted sporty five-point grille and wide, bold bumper. A horizontal streak of chrome floats on the front grille bar, giving a distinctive and high quality feel. Side windows form a flowing, open and modern greenhouse, allowing clear vision from all seating positions. The unique trapezoid chrome exhaust pipe accentuates the fine detail put into the design.


INTERIOR STYLING STANDS OUT
Once inside the CX-9, the driver is greeted by a neatly organized combination of cylindrical shapes and blacked-out instruments on a T-shaped instrument panel. Brightly edged gauges with metal-look trim and indirect blue illumination set a cool mood. Indirect lighting also is embedded in the front and rear door trim and ceiling for a warm glow. Horizontal elements in areas such as the center panel, door trim and seat design intersect with vertical accents to create the same harmony present in fine furniture.


Interior craftsmanship and attention to detail is visible everywhere. Soft trim is elegantly configured and constructed of top-quality materials and seats have an inviting yet sporty look and feel appropriate to this type of vehicle. The dash panel houses large, clearly marked entertainment and climate controls. Delicate stitching and the metallic look of the floating door trim-grips reveal the designer’s fine eye for detail.

ENERGETIC AND REFINED POWERTRAIN
The CX-9 is powered by a new 3.5-liter V-6 with a preliminary rating of 250-horsepower. Advanced features include dual-overhead camshafts, four valves per cylinder, variable valve timing, a high compression ratio and electronic throttle control. While six-speed automatic transmissions have until now been exclusive to premium-priced SUVs, the CX-9 provides that desirable feature as standard equipment. The direct benefits to Mazda customers are optimum acceleration and passing performance, coupled with excellent highway fuel efficiency.


Drive is either through the front wheels or via Mazda’s advanced Active Torque-Split All-Wheel Drive system. On all-wheel-drive models, various sensors signal control modules to automatically apportion torque to those wheels most able to provide solid traction. A computer-controlled coupling, connected with the rear differential, automatically adjusts the torque distribution, allowing up to 50-percent of the drive power to be sent to the rear wheels, depending on traction conditions. This all-wheel drive system has been especially well received in MAZDASPEED6 and CX-7 applications.

SURE-FOOTED CHASSIS & BODY
The stiff unibody of the Mazda CX-9 provides a sound foundation for a poised ride and agile handling. Computer-aided-engineering analysis was used to optimize this structure, delivering high torsional and bending rigidity with minimal weight.

In front, the perimeter frame mounted to the unibody through six rubber isolators supports the powertrain, the engine-speed-sensitive rack-and-pinion power steering, and a low friction strut-type suspension system using coil springs. The multilink rear suspension consists of one trailing arm and two lateral locating members per side. To minimize cargo-compartment intrusion and permit a wider load space, the rear coil spring is positioned between the lower lateral member and the unibody. Anti-roll bars at each end maximize agility and control during assertive driving.

Twenty-inch, V-rated, low-profile radial tires (P245/50R-20) are standard equipment on the top Grand Touring model while Sports and Touring editions roll on P245/60R-18 tires. As a result, CX-9 looks and feels unusually nimble for its size and is the clear class leader for driving pleasure.

SAFETY WITH ADVANCED TECHNOLOGY
The Mazda CX-9’s safety features are highlighted by an advanced Roll Stability Control (RSC) system that uses both body-roll rate and wheel speed sensors to determine when corrective action is necessary. A momentary torque reduction, combined with an automatic brake application, assists in restoring the CX-9 to an even keel.


Four-wheel disc ventilated brakes include an Anti-lock Brake System (ABS) to prevent lockup during emergency use. When excessive wheel slippage is detected, a Traction Control System (TCS) automatically reduces driveline torque to help restore traction. Dynamic Stability Control (DSC) reduces driveline torque and automatically applies one or more brakes to minimize under- or over-steer during emergency maneuvers. Additional protection is provided by sensor-activated side-curtain airbags which extend from the first to the third row.

TRIM AND ENTERTAINMENT FEATURES
CX-9 is offered in three trim levels: Sport, Touring and Grand Touring. More detail on specific model content will be available closer to launch, but standard features on all trims include air conditioning, power windows, power door locks with remote keyless entry, cruise control, and six airbags. To help avoid accidents, all CX-9s are fitted as standard with DSC, RSC and ABS with brakeforce distribution. An optionally available power-operated lift gate provides one-touch opening and closing access to the cargo hold.

Features available in models and packages include leather interior trim, power adjustment for front seats, high intensity discharge headlamps with automatic-on, rain-sensing wipers, mirror-mounted turn indicators and driver’s-seat memory.

PRELIMINARY SPECIFICATIONS MAZDA CX-9

Dimension

Overall length

199.6 inches (5,071 mm)

Overall width

76.2 inches (1,936 mm)

Overall height w/ 18 inch tires

68.1 inches (1,729 mm)

     w/ 20 inch tires

68.3 inches (1,734 mm)

Wheelbase

113.2 inches (2,875 mm)

Seating Capacity

7 passenger

Engine

Type

MZI 3.5L V6 DOHC, 4 valves per cylinder

Max. power

250 hp

Max. torque

240 lb-ft

Transmission

Type

6-speed electronically controlled

automatic with manual shift mode

Steering

Type

Rack-and-pinion

Suspension

Type (front/ rear)

Macpherson Strut/ Multilink

Brake

Type (front & rear)

Ventilated Discs

Tires and wheels

Tires (front & rear)

18”: P245/60R18

20”: P245/50R20

Wheels (front & rear)

18”: 18 x 7.5J

20”: 20 x 7.5J

2007 Suzuki XL7 World Debut at 2006 NYIAS

The 2007 XL7 is bigger, bolder and more powerful than the previous generation XL-7 and retains Suzuki’s strong styling cues, while offering available all-wheel drive and available seven-passenger seating. In creating the all-new XL7, Suzuki leveraged its SUV heritage and expertise to design an all-new vehicle for the midsize SUV crossover segment that provides style, room and adaptability for active, mobile lifestyles.

Performance and Powertrain
The all-new 2007 Suzuki XL7 evolves from a rear-wheel-drive, truck chassis SUV into a crossover SUV based on the GM Theta platform with full-length underbody rails for added strength. The XL7 is now a front-wheel-drive vehicle that features four-wheel independent suspension and available all-wheel drive. The standard powertrain for the Suzuki XL7 is a GM-designed, Suzuki-built 3.6-liter, V6 DOHC engine rated at an estimated 250 hp with 243 lb-ft of torque.

The 3.6-liter, six-cylinder, DOHC engine is matched to a five-speed automatic transmission that features a manual-shifting (manumatic) mode. Although the new engine is nearly one liter larger than the 2.7-liter engine used in the previous XL-7, the new, larger XL7 was designed to deliver fuel economy equal to or better than its predecessor. EPA fuel economy estimates are 18 mpg/city and 24 mpg/highway for front-wheel-drive variants and 17 mpg/city and 23 mpg/highway for all-wheel drive. Towing capacity is rated at 3,500 pounds.


Advanced Chassis Design
The sophisticated chassis delivers nimble, car-like ride and comfort whether driving on the highway, city streets or rural roads. The XL7’s responsive road manners communicate a sense of confidence and control in virtually every driving scenario, while still providing refined Noise, Vibration and Harshness (NVH) performance at or near the top of the midsize SUV category.

The XL7 features four-wheel independent suspension with MacPherson struts in the front and a multilink design in the rear. The independent rear suspension is fitted with hydraulic shock absorbers in the five-passenger configuration and Nivomat self-leveling rear shock absorbers when configured for the available seven-passenger design.

All-Wheel Drive
The available all-wheel-drive system uses an active, electronically controlled rear differential module. The system responds immediately to all-wheel-drive requests and effectively eliminates lag times. A four-mount cradle secures the rear drive module, which is regulated by its own dedicated electronic controller. A new-design propeller shaft fitted with upgraded universal joints handles the added torque.

Sleek Sophistication and Functionality
Evolved from the Suzuki Concept-X, which debuted at the 2005 North American International Auto Show in Detroit, the all-new XL7 features a modern, sleek and expressive design with Suzuki styling cues, such as triangle-shaped turn lamps, bold three-bar grille with large Suzuki “S,” muscular wheel arches, dual exhaust with chrome tips and integrated roof racks.

Plush Interior
The 2007 Suzuki XL7 offers the driver and passengers a spacious, function
al interior that provides upscale sophistication and refinement. The unique third-row seat delivers seven-passenger capability and real comfort.

With its six-inch deep footwell, the stretched platform delivers comfortable third-row seating, offering nearly 40 inches of legroom and 38.8 inches of headroom. In addition, the 50/50 split folding third-row seat can be folded flat into the floor for additional cargo carrying room, and the fold-flat front-passenger seat allows room for longer items such as skis, surfboards or even a small kayak.


In addition to the practicality of ample storage consoles and areas and the convenience of four 12-volt power outlets, the interior of the 2007 Suzuki XL7 features upscale wood or satin nickel appliqués on the instrument panel and doors, chrome accents throughout and matte black, low-gloss surfaces. Leather seating surfaces and leather-wrapped steering wheel are also part of certain trim packages.

Safety Features
The XL7’s
safety features start with the body structure itself – a combination of computer-designed high-strength, dual-phase and galvanized steels. The body structure is computer-designed to manage loads – to effectively transfer energy absorbed during impacts around the interior compartment and occupants – in both front and rear crashes

Packages and Pricing
Currently, Premium and Luxury trim levels are planned. Both will be
offered with front-wheel drive or available all-wheel drive. Two Premium models will be available in five-passenger seating configuration and a third Premium model will be in seven-passenger configuration. Premium models can be outfitted with leather seating surfaces and sunroof.

Two Luxury trim level models will be offered. Both will offer seven-passenger seating and a rear-seat DVD entertainment system. One will offer standard front-wheel drive while the other will come with all-wheel drive. Additionally, a navigation system and sunroof will be offered. The navigation system and the DVD system cannot be packaged together, so Luxury models equipped with the navigation system will omit the DVD System.


The Premium models feature 16-inch alloy wheels with P235/65R16 tires, while Luxury models are fitted with 17-inch alloy wheels and P235/60R17 tires. The 16-inch spare tire is carried in an outside-the-cabin underfloor area equipped with a hoist system.

Current projections call for 50 percent sales of front-wheel-drive and 50 percent sales of all-wheel-drive models. While prices will not be set until the vehicle goes on sale in the fourth quarter of 2006, the manufacturer’s suggested retail price is expected to range from $23,000 to $29,000.

2007 XL7 vs 2006 XL7

2007 XL7

2006 XL-7

Increase

Wheelbase:

112.4 in.

110.2 in.

2.2 in.

Overall length:

196.7 in.

187.4 in.

9.3 in.

Overall width:

72.2 in.

70.1 in.

2.1 in.

Overall height:

68.9 in.

68.0 in.

0.9 in.

Tread width, f/r:

61.6/61.8 in.

59.1/59.1 in.

2.5/2.7 in.

Engine displacement:

3.6 liters

2.7 liters

0.9 liters

Horsepower:

est. 250 bhp

185 bhp

65 bhp

Torque:

est. 243 ft-lbs

184 ft-lbs

59 ft-lbs

Overhang, front:

37.5 in.

29.7 in.

7.8 in.

Overhang, rear:

46.5 in.

42.3 in.

4.2 in.

Ground clearance:

7.9 in.

7.6 in.

0.3 in.

Approach angle:

17.5 degrees

28.5 degrees

-11.0 degrees

Departure angle:

20.0 degrees

23.4 degrees

-3.4 degrees